Description
Pentax CAM150/01- Cast Iron Jet Pump **Second Hand**
Second hand product, in good condition, no original box
CAM 150/01 w/ Watertech Presscontrol
The Pentax CAM Series are self-priming centrifugal Jet Pumps available in four models. Ideal for house or farm water supply and transfer, the Jet/Venturi design provides the pump with the ability to lift water 8 meters below from the water source. Other Applications include drawing water from rivers, ponds, wells, bores and underground tanks. The Cam series are a heavy duty and robust pump.
Specifications:
Model | Flow (LPM) | Head (M) | KW | HP | Amps | Phase |
CAM 150/01 | 120 | 51 | 1.5 | 2.0 | 8.5 | Single |
* Inlet 40mm/Outlet 32mm (Has reducing fittings-25mm outlet on Press Controller)
* Single phase voltage range: 220-240V PSC
* Insulation: Class F
* Protection: IP44
* Rating: Continuous
Features:
* Suction Lift - 8 Metres
* Heavy Duty Build
* Cast Iron Body & Motor Bracket
* Ceramic Mechanical Seal
* Stainless Steel Shaft
* Built in thermal overload protection
Operation limitations:
* Liquid temperature range: 0ºc to +50ºc
* Maximum operating pressure: 8bar/116PSI
Applications:
* Suitable for Large Homes
* Farm supply
* Water transfer
* Drawing water from rivers, ponds, wells, bores and underground tanks
Watertech Presscontrol
The Water Tech Presscontrol is an electronic automatic controller ideal for control and protection of single phase pumps. The controller is designed to start and stop the pump depending on opening and closing of the taps. It will also protect the pump in case of a water shortage by preventing it from dry running. Press controllers are ideal for above ground and submersible pumps.
Features:
*Run Dry Protection
*Colour: Blue/Yellow
*1.5 or 2.2 Bar Cut In
*A user-friendly interface with LED indicators displaying power status, pump running and alarm indication
*Wetted parts are made from high quality corrosion resistant materials
*1” (25mm) Inlet/Outlet
Technical Features:
*Power: 1.5kW (2 HP)
*Max Current: 10A
*Max Operating Pressure: 12 Bar
*Single Phase-230
*Frequency: 50-60 Hz
*Protection Grade: IP65
*Tax Temperature: 60°C
*Minimum Flow Rate-1 LPM
Installation & Start up:
The device can be installed directly on the pump or between the pump and the first tap. Make all the electrical connections, check that the pump is correctly primed, open a tap and energize. The green Power on Led will light up on the control panel and the pump will start (yellow “Pump on” Led on) and will keep running for several seconds to pressurize the system.
If this time is insufficient, the device will stop the pump (red “Failure” led on). Press and hold down the Restart button until the red Failure led turns off and the water comes out of the open tap. When the tap is closed, the pump will stop after a few seconds (yellow “Pump on” led turns off).
From now on, the device will turn the pump on and off depending on the opening and closing of the tap. In case of water shortage, the device will stop the pump and protect it from dry running (red “Failure” led on). In case of a temporary blackout, the device will automatically rearm once the electricity returns
Control Panel:
Power on | Green LED on | Power On |
Pump on | Yellow LED on | Pump On |
Restart | Red Button | Restarts the device and the system in case of failure |
2 Year Warranty
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.