Trevoli SUBTRON-50


or pay in 4 interest-free instalments with

Price:
Sale price$1,014.00incl GST

Pickup available at Albany, Auckland

Usually ready in 24 hours

Not sure it's the right one? Call 0800 473 414 or email us. Free advice from our team.

  • Delivered NZ-wide
  • 20+ years serving Kiwi homes
  • Stores in Albany & Hamilton

Description

Trevoli SUBTRON-50 Submersible Pressure Pump

The pump is a light and compact, high head submersible, clean water, automatic pressure system pump supplied wired and ready to install. The pump includes an electronic automatic restart, built in electronic pressure control designed to automatically start and stop the pump when water is used & the standard model includes a float switch installed for run dry protection.

Please note this pump has a maximum of seven stop/starts per two minutes. Once it reaches this, it will need to be restarted. A pressure tank is essential.  

Specifications: 

* Power: 1200 watts
* Max Head: 50 Metres
* Max Flow rate: 100lpm.
* Voltage: 240v 
* Frequency: 50Hz
* Amps: 4.6
* Maximum submergence: 7m
* Subtron Outlet: 25mm
* Subtron X Outlet: 32mm

Applications: 

* Household pressure systems
* Garden & Sprinklers
* Any clear water application requiring high pressure

Features:

* Built-in electronic pressure switch and flow sensor 2.2 bar start
* The pump features automatic dry-run protection and will attempt to restart after 30 
   seconds, 5 minutes, then hourly for 24 hours. If water levels remain low, it will continue       trying to restart every 24 hours until normal water levels are restored.
* Built-in air bleed:  Allows trapped air to escape as the water level rises.
* Rated for Continuous use
* Built-in non return valve
* Supplied with 10 m power cord
* Subtron-50: Supplied with Float Switch
* Subtron-50X: No Float Switch

Technical Features: 

* IPX68
* Insulation class: F 
* Net weight: 12.0 kg
* Dimensions: 900H x 125W (mm)
* Liquid: Clean water temperature range: 0 – 35 °C
* Maximum ambient temperature: 40 °C
* Pump body 304 stainless steel
* Impeller, diffuser noryl glass reinforced
* Mechanical seal carbon/ceramic/nitrile

Operation: 

* Fully electronic pump controller for automatic pump starting, stopping and restart after power loss or water loss.
* Dry run protection to prevent pump damage.
* 2.2 bar cut in pressure.
* Corrosion resistant pump components to ensure durability.
* 230V single phase TEFC motor with built-in auto reset thermal overload to prevent the pump from overheating.
* Please note this pump has a maximum of seven stop/starts in a 2 minute cycle. Once it reaches this, it will need to be restarted. A pressure tank will help reduce this. 


Please note this pump has a maximum of seven stop/starts per two minutes. Once it reaches this, it will need to be restarted. A pressure tank is essential.  

2 Year Back to Base Warranty

    You may also like