Davey Submersible Grinder Pumps
Submersible pump consisting of a solids handling grinder inlet with a high head open impeller to pump waste water containing soft solids in suspension.
*2 pole, 2900rpm
*50Hz 240V single phase or 415V three phase.
*Submersible with IPx8 enclosure.
*Class E insulation
*Maximum 50 degrees
*10 meter cable
|Model||Flow Rate||Pumping Height||Inlet/Outlet||Wattage||Voltage/Phase||Other|
|D75G||180 LPM||16meters head||1¼"||0.75 KW||220-Single||No Float|
|D75GA||180 LPM||16meters head||1¼"||0.75 KW||220-Single||Float|
|D120G||200 LPM||18meters head||1¼"||1.2 KW||220-Single||No Float|
|D120GA||200 LPM||18 meters head||1¼"||1.2 KW||220-Single||Float|
|D150G||225 LPM||22 meters head||1¼"||1.5 KW||220-Single||No Float|
|D150GA||225 LPM||22 meters head||1¼"||1.5 KW||220-Single||Float|
|DT08G||180 LPM||16 meters head||1¼"||0.75 KW||415-Three||No Float|
|DT12G||200 LPM||18 meters head||1¼"||1.2 KW||415-Three||No Float|
|DT15G||225 LPM||22 meters head||1¼"||1.5 KW||415-Three||No Float|
|DT22G||325 LPM||24 meters head||2"||2.2 KW||415-Three||No Float|
|DT37G||400 LPM||35 meters head||2"||3.7 KW||415-Three||No Float|
*Heavy duty shredding and grinding ring at inlet.
*Centrifugal design, open impeller.
*Double Mechanical shaft seal in oil bath.
*Hard faced Silicon Carbide/Ceramic seal on pump side.
*Sand slinger lip seal for added protection.
*Oring casing sealing.
*Corrosive resistant stainless steel and quality heavy duty powder coated cast iron pump parts
*10 metre HO7RN-F oil resistant power lead and seal sensor lead fitted with bared wire lead ends for easy connection to power supply terminations.
*Seal sensor leads fitted for easy connection to a protection relay to enable timely repairs prior to motor damage(Not fitted to D75G/GA or DT08G models)
*Protected against both high operating temperatures and high current by a built in automatically resetting thermal overload.
*Quick and easy installation
*Hose tail supplied with every pump
*Mounting feet with rubber cushions for D75G/ GA, DT08G, D120G/A, D150G/A, DT12G & D
*Grey and black water pumping
* Septic effluent and sewage disposal
*Pumping of waste water with soft solids in suspension
*Pumping soft organic solids, sanitary products, thin rubber products and even some textiles in suspension, by shredding to a slurry
*Open impeller prevents blockage of the pump by small solids in the slurry
*High heads and small solids allow connection to small discharge pipe systems, especially suited to pumping waste water to pressure sewer main
*Sewage or “Grey Water” of neutral pH containing up to 20% soft organic solids (some wear should be expected while pumping hard solids in suspension).
1 Year Warranty
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.