GRUNDFOS CMB-SP 3 Series Booster Pump – Multistage Pressure System
GRUNDFOS CMB-SP 3 Series Booster Pump – Multistage Pressure System
perf-curve-cmp-sp-b6me-bh-t1f9-53-g.jpg
grundfos-logo-d2rg-lm-bdpn-r2-g.jpg
Roll over image to zoom in Click on image to zoom
GRUNDFOS CMB-SP 3 Series Booster Pump – Multistage Pressure SystemGRUNDFOS CMB-SP 3 Series Booster Pump – Multistage Pressure Systemperf-curve-cmp-sp-b6me-bh-t1f9-53-g.jpggrundfos-logo-d2rg-lm-bdpn-r2-g.jpg

GRUNDFOS CMB-SP 3 Series Booster Pump – Multistage Pressure System

or pay in 4 interest-free instalments with

Price:
$1,602.00incl GST

Pickup available at Albany, Auckland

Usually ready in 24 hours

Not sure it's the right one? Call 0800 473 414 or email us. Free advice from our team.

  • Delivered NZ-wide
  • 20+ years serving Kiwi homes
  • Stores in Albany & Hamilton

Description

Grundfos CMB-SP 3 Series Booster Pump System

Please contact us regarding availability, as some models may need to be ordered from our supplier.

The Grundfos CMB-SP 3 Series is a range of compact, self-priming booster pump systems designed for domestic and light-commercial water supply applications.

Each system combines a Grundfos CMB-SP multistage pump with a Grundfos PM2 pressure manager. The PM2 automatically starts and stops the pump according to water demand and provides dry-running and anti-cycling protection.

Recommendation: Adding a pressure tank can reduce pump starts, reduce operating noise and extend the life of the pump. Select the required pressure tank from the dropdown menu.

A free three-way tee is supplied with any pump and pressure-tank combination.

Specifications

Model    kW    Amps    Outlet    Inlet    Flow Rate    Head [m]    Controller

CMB-SP 3-28    0.50    3.1–2.8    1" M    1" F    50 LPM    20.5    PM2 – 1.5 bar

CMB-SP 3-37    0.50    3.1–2.8    1" M    1" F    50 LPM    27.7    PM2 – 1.5 bar

CMB-SP 3-47    0.50    3.1–2.8    1" M    1" F    50 LPM    34.9    PM2 – 2.2 bar

CMB-SP 3-56    0.67    4.4–4.0    1" M    1" F    50 LPM    42.1    PM2 – 2.2 bar

Common Specifications

  • Supply voltage: 1 × 220–240 V, 50 Hz
  • Maximum flow: approximately 66 L/min
  • Liquid temperature range: 0°C to +60°C
  • Sound pressure level: below 55 dB(A)
  • Motor enclosure class: IP55
  • Adjustable PM2 cut-in pressure
  • Maximum system pressure: 10 bar

Features

  • Compact, self-priming multistage design
  • Automatic start and stop according to water demand
  • Dry-running protection
  • Anti-cycling alarm for potential pipe leakage
  • Stainless-steel impellers, intermediate chambers and shaft
  • Cast-iron pump housing
  • Hard-wearing carbon and ceramic mechanical seal
  • Suitable for generator operation
  • Complies with AS/NZS 4020 requirements for products used with drinking water

Applications

  • Domestic household water supply
  • Pressure boosting from above-ground water tanks
  • Pressure boosting from suitable below-ground water sources
  • Mains-water pressure boosting where permitted
  • Garden watering and irrigation
  • General water transfer
  • Light-commercial applications

Warranty: 2-year back-to-base warranty.

You may also like